Reliable HDBaseT Matrix Switch Solutions
SKU: MX-1007-HYB
The MX-1007-HYB is a next-generation matrix switcher offering seamless 4K60Hz switching, HDBT™ technology, NetworkHD 500 scalability, and integrated Dante audio with a 100W amplifier and DSP for a premium audiovisual experience.
Key Features
- 4K60Hz Seamless Switching: Crystal-clear visuals with smooth transitions during source changes.
- HDBT™ In/Out: Long-distance AV transmission over a single cable for reduced clutter and easier setup.
- NetworkHD 500 In/Out: Scalable signal distribution over 1G network for flexible AV setups.
- Built-in 100W Amplifier with DSP: Directly drive stereo speakers with integrated audio processing.
- Sygma Cloud Device Management: Remotely monitor and control devices with online support and updates.
Technical Specifications
Audio & Video
- Inputs: 1x USB-C (Alt-Mode), 7x HDMI, 1x HDBT 3.0, 1x NetworkHD 500, 2x USB-B Host
- Outputs: 4x HDMI, 2x HDBT 3.0, 1x NetworkHD 500, 4x USB-A Device, 4x GPIO, 2x Relay
- Encoding: HDBaseT, JPEG 2000
- Encoding Data Rate: 18Gbps
- Audio Formats: PCM 2ch Analog, Dante 4×4
- Max Video Resolutions: 3840x2160p @60Hz 4:4:4
- Max Pixel Clock: 600MHz
Communication & Control
- HDMI: HDMI 2.0, HDCP 2.3, EDID, CEC
- HDBaseT: HDMI 2.0, HDCP 2.3, USB 2.0, RS-232, 1-way PoH
- NetworkHD: HDMI 2.0, HDCP 2.3, USB 2.0, RS-232
- Dante Ultimo: 4×4 on 1GbE
- RS-232: 1x 3-pin Phoenix (Matrix control & routing)
- Ethernet: 2x RJ-45 (Matrix control, Web UI)
Power
- Power Supply: 100~240V AC 50/60Hz
- Max Power Consumption: Approx. 150W
Environmental
- Operating Temperature: 0 to +45°C
- Storage Temperature: -20 to +70°C
Dimensions
- Rack Units: 2U
- Height: 88mm
- Width: 440mm
- Depth: 362mm
Standards
- Supported: DCI (4096×2160), RGB, HDR10, Dolby Vision, HLG, BT.2020
Additional Features
- Multiple video inputs: USB-C, HDMI, HDBaseT, NetworkHD
- Fast seamless switching with scaling
- USB-C input supports 4K60, USB 3.0/2.0, 1G Ethernet, PD 60W
- Audio matrix up to 18×10 with advanced DSP (AEC, AGC, EQ, etc.)
- Relay and GPIO support for automation
- HDCP 2.3 compliance with EDID management
In the Box
- 1x MX-1007-HYB Matrix
- 1x AC Power Cord (US/UK/EU/AU)
- 1x USB-C Cable (2m)
- 2x 1-Pin Terminal Block
- 3x 3-Pin Terminal Block
- 4x 5-Pin Terminal Block
- 1x 6-Pin Terminal Block
- 2x Mounting Brackets with Screws
- 1x Quickstart Guide