Experience unmatched versatility with the NHD-120-IW-TX, your ultimate AV over IP solution. This 2-gang in-wall encoder, part of our 100 series, boasts an HDMI input and a dedicated Ethernet port, designed to seamlessly integrate with today’s modern laptops and tablets. Whether you’re enhancing your educational setup or optimizing your corporate environment, this encoder is your key to success.
Install it discreetly in a wall, table, desk, podium, or any location where remote input is essential. The NHD-120-IW-TX also offers the flexibility to connect the CAM-210-PTZ camera via HDMI while providing a robust Ethernet connection to ensure your AV streams are pristine and uninterrupted.
TAILORED FOR MULTIPLE MARKETS
The NetworkHD™ 100 Series utilizes low bandwidth, infinitely scalable technology with the addition of powerful video wall support up to 16×16 for the best all-round solution for commercial AV installations. A 100 Series encoder can either be paired with a 100 Series decoder for matrix switching to individual screens or for video wall decoding, with both decoders including HDMI and analog audio breakout outputs, or an NHD-150-RX decoder for multiview monitoring.
H.264/H.265 Encoding
Choose your flavor, the NHD-120-IW-TX can encode AV signal using either H.264 or H.265. Using H.265 provides incredibly efficient video streams. For comparison, an H.265 5Mbps stream is equal to a 30Mbps H.264 stream.
4K Resolution
The NHD-120-TX is now supporting 4K content that ensures compatibility with the HDMI v1.4 HDCP 2.2 video source, while a built-in scaler ensures hassle-free mixing of the latest 4K displays and 1080p screens within an installation.
Compact Design
The simplistic white decora plate and small 2-gang size allows the encoder to be installed and blend in to a number of different environments. The front of the encoder isn’t crowded with unnecessary connections and the support for PoE means you don’t need to run extra cables through the wall.
Ecosystem
The NHD-120-IW-TX is just one of many models within the NetworkHD 100 series. Mix and match different models to tailor your system to your requirements. All of which are controlled and maintained by the NHD-CTL-PRO controller.
AUDIO
& VIDEO
Inputs
1x HDMI
19-pin HDMI type A
Outputs
1x
Ethernet: RJ45 Female socket
1x 5-pin Phoenix Analog Audio
1x 3.5mm IR TX
Output
Video Encoding
H.264/H.265
End to
End Latency
1080p:
High Quality Mode: ~250ms
Low Latency Mode: ~80ms
4K:
High Quality Mode: ~300ms
Low Latency Mode: ~150ms
Encoding
Data Rate
Max: 30Mbps
(configurable)
Default parameters: 4K30/H.265/VBR 16Mbps
Stream
Preview
CIF@30/MJPEG/512Kbps
Video
Resolution (Max)
3840X2160p@30
4:2:0
1920x1080p@60 4:2:0
1920X1200p@60 4:2:0
Audio: LPCM (stereo,32/44.1/48Khz,16-bit)
Maximum
Pixel Clock
150MHz
COMMUNICATION
& CONTROL
HDMI
HDMI v1.4 |
HDCP 2.2 | EDID
Network
1x 1GbE
RJ45 for av stream
1 x Auxiliary 1GbE channel for network connectivity of attached source devices
RS-232
1x 3.5mm
debug only
Security
Protocols
AES 128 |
SSH | HTTPS
POWER
Power
Supply
12V DC 1A |
802.3af PoE Compliant
Max
Power Consumption
Max: 12w |
Average: 6w
- Supports up to 4K @ 30Hz video content
- Support
all SD and HD formats – including interlaced content
- Flexible
encoding using either H.264 or H.265 encoding. Encoding is configurable
between a constant bitrate or variable bitrate.
- Low
bandwidth or high-quality transmission methods:
Low latency ~ 80ms.
High-quality ~250ms
- Compatible
with NHD-150-RX Multiview receiver.
- Analog
audio de-embed for easy connection to external audio DSP or amplifier
- Seamless
video switching – no black screens or freeze frames
- Hugely
scalable I/O, utilizing multicast technology
- Live
video preview streams for use with NetworkHD Touch or a custom control UI
- Flexible
IP address settings: AutoIP/Static/DHCP
- IR
transmitter for source control
- Batch
firmware update and batch settings functions offers a massive reduction on
installation times
- Custom
EDID management with import/export
- HDCP
2.2 compliant
- IEEE
802.3af PoE compliant PD