Introducing the TS-280 to the WyreStorm range. The 2.8?? colour touchscreen can control any product within the WyreStorm presentation switcher range. With ease of use in mind the TS-280 is as easy to use as it is to set up, with pre-configured UI??s ready to upload in just seconds via the MicroSD card slot on the rear.
The UI??s are simple to use with large buttons clearly labeled for each major function and navigation controls (where applicable) to move between pages. Using a standard RJ45 connection on the rear and RS-422 communication, the TS-280 also comes with an in-line RS-422 to RS-232 converter which doubles as a power-injector if used with a product that doesn??t feed the 12v power.

TOUCHSCREEN
INTERFACE
Instantly
identified as a simple control interface yet giving the appearance that a
sophisticated control system is behind the scenes, the 2.8?? touchscreen
simplifies matters by firstly removing the expensive processor within a control
system and secondly sending serial commands directly to the switcher via Cat5e
cable

INTUITIVE
& SIMPLE USER CONTROL
Why use a
sledge hammer to crack a walnut? When a full control system processor is
considered over-kill for a small classroom or meeting space, the TS-280 has you
covered. Aside from the automatic operation of the WyreStorm switcher, basic
functions such as switching and CEC triggering can be controlled from this
simple interface touch.

SIMPLE
SETUP
The
pre-configured UI??s for the TS-280 align with all WyreStorm presentation
switcher products, offering a quick & easy solution when manual control of
the meeting or education space is required. Once downloaded from the website,
the UI file can be uploaded and ready to go in less than 30 seconds.

EXTENDED
RANGE
Using
RS-422 communication between the touchscreen and the interface module means
that even the longest of cable runs can be accommodated; up to 100m/328ft
between control point and switcher. Power can either be drawn directly from a
compatible switcher or via 12v PSU connected to the interface module.
Communication and control
|
Touchscreen
|
Touchscreen
Interface Module
|
Switcher
Control
|
1x RS-422: 8-pin RJ-45 Female
|
1x
RS-232: 4-pin Phoenix
|
Max
Communication Distance
|
100m/328ft Interface to Touchscreen
|
15.24m/50ft Switcher to Interface
|
Power
Power
Supply
|
12VDC from Touchscreen Interface Module
|
12VDC from switcher or seperate PSU (not included)
|
Max
Power Consumption
|
0.84W
|
0.36W
|
Environmental
Operating
Temperature
|
0 to + 45??C (32 to + 113 ??F), 10% to 90%,
non-condensing
|
Storage
Temperature
|
-20 to +70??C (-4 to + 158 ??F), 10% to 90%,
non-condensing
|
Maximum
BTU
|
Transmitter: 24 BTU/hr | Receiver: 58 BTU/hr
|
|
Dimensions & Weight
Rack
Units | Wall Box
|
2 Gang
|
<1U
|
Height
|
86mm/3.39in
|
25mm/0.99in
|
Width
|
147mm/5.79in
|
80.2mm/3.16in
|
Depth
|
32.1mm/1.27in
|
50mm/1.97in
|
Weight
|
0.28kg/0.62lbs
|
0.14kg/0.31lbs
|
Regulatory
Safety
and Emission
|
CE |
FCC | RoHS
|